 |
|
|
|
|
|
| DA20 |
| DCC |
| SA20 |
| SA3 |
| µLogger |
| DH24 |
Description:
The DA20 is a sturdy
and accurate moisture controller for measuring %RH,
temperature and dew point and controlling a dehumidifier
or a humidifier. The DA20 controls the dehumidifier/humidifier
by measuring the moisture in the air around the
transmitter and comparing the measured %RH and/or
calculated dew point with a user defined setpoint.
The DA20 is easily programmable via the user
friendly keypad.
Description:
The DCC controller
is developed as a multi function, micro-processor
based controller for the HBC CR & CRP/CRT series
of dehumidifiers. The controller consists of 3 main
components: A Interface Unit, a Control Panel with
display and a sensor. Up to 3 sensors can be connected,
also wireless sensors. Can be used as room sensors
or for duct mounting.
Description:
SA20 is
a new and modern intelligent temperature and moisture
transmitter based on the new revolutionary CMOSens
technology. It combines, among other things, sensors,
AD converting and calibrating factors in one and
same process.
Description:
SA3 Surface Adaptor
kit is an option for SA20 for using the
sensor as a surface sensor, ex. on cold pipes in
water works, pump stations, water power stations,
sewage treatment works. For eliminating condense
on the cold pipes use: SA3 + DA20 or DCC + HBC
dehumidifier. This automatic dehumidification system
will eliminate condense on the cold pipes with a
minimum of energy consumption of the dehumidifier.
Description:
The µLogger
is a small, high quality and versatile battery powered
remote data logger. The µLogger monitors temperature,
humidity and dew point. A high quality precision
temperature and humidity sensor is used which gives
a digital output and has excellent long-term stability.
Software for Windows95 and newer operating systems.
Description:
The DH24 is a electronic
moisture controller which consist of a interface
unit with a temperature and humidity sensor, and
a remote control panel with keypad and display.
The control panel can be placed up till 500 meters
away from the interface unit.
DA20
DCC (Dehumidifier Control Centre)
SA20
SA3 (Surface Adaptor Kit)
µLogger
DH24
